Rear wheel kit complete – MPN 5782751-01
Complete rear wheel kit for Automower 105/305/308 (G3/P1). Fixes rough running, stiff wheel rotation and bearing play.
- Replaces older number 578 27 51-01 (5782751-01) – usually supplied as the current version 5782751-03
- Complete kit: rear wheel with bearing/axle (depending on version, pre-assembled)
- Typical issues: wheel turns hard, rear wheel locks, bearing play, uneven drive marks
- Fits multiple Husqvarna and Gardena models (see table)
Technik
- Platform: P1
- Generation: G3
- Position: rear wheel / rear axle
- Shipping weight: approx. 160 g
Einbau
Check the old wheel for cracks, worn bearings and corrosion. Clean the bearing seats before fitting the new kit.
After installation, spin the wheel by hand: it should rotate freely without noticeable wobble.
- Check sealing (seals/O-rings depending on version)
- For Automower 305, verify the model year (up to 2016: 3-wheel version)
- Tighten screws carefully—do not overtighten plastic parts
Kompatibilität
| Modell | Passende Artikelnummern/MPN | Ersetzt (belegt) | Hinweis/Version |
|---|
- Husqvarna Automower 105 – 2016->
- Husqvarna Automower 305 – 2011-2015
- Husqvarna Automower 308 – 2013-2015
- Gardena R38Li – 2015-2017
- Gardena R40Li – 2012->
- Gardena R45Li – 2013->
- Gardena R50Li – 2015->
- Gardena R70Li – 2013->
- Gardena R80Li – 2015->
- McCulloch Rob R600 – 2017->
- McCulloch Rob R1000 – 2017->
- Flymo 1200R – 2013; 2016-2017
| 578 27 51-01, 5782751-01, 578275101, 578 27 51-03, 5782751-03, 578275103, 5759493-01, 5778470-01, 5761319-01, 5838539-01, 5838539-02, 5782751-02, 5782751-04 | Ersetzt: 5778470-01, 5759493-01, 5761319-01, 5838539-01, 5838539-02, 5782751-02, 5782751-03, 5782751-04 | Aktuelle Ausführung; Automower 305 bis 2016 (Erkennungsmerkmal: 3 Räder) |
Important: 5782751-01 is documented as the predecessor. If your machine uses the newer design, 5782751-03 is the correct replacement number.
• Complete rear wheel kit for Automower 105/305/308 (G3/P1)
• Solves stiff wheel rotation, bearing play and rear wheel locking
• Predecessor 5782751-01 – typically supplied as current 5782751-03
• Compatibility across multiple Husqvarna/Gardena models (see table)
