Wiring harness lift & collision sensor – 5852085-01
This wiring loom connects the lift sensor and collision sensor inside the chassis of your Automower 310/315. Used, inspected and function-tested.
- Genuine Husqvarna part (MPN 5852085-01 / 585208501)
- For front lift & collision sensor wiring (G3/P15)
- Fits Automower 310/315/315X and selected Gardena SILENO/SILENO+
- Installation requires opening the mower
- Replace seal strips after opening
Technical
- Function: signal/power loom for lift & collision sensors
- Install location: chassis
- MPN/OEM no.: 5852085-01 / 585208501
- GTIN/EAN: 7393089276958
Installation
The top cover must be opened for replacement. Ensure proper sealing afterwards.
Before buying, compare the part numbers and the model year of your mower.
- Replace seal strips to reduce moisture ingress risk
- Avoid pinching the cable; lock connectors fully
- Test lift/collision sensor function after assembly
Compatibility
| Modell | Passende Artikelnummern/MPN | Ersetzt (belegt) | Hinweis/Version |
|---|
- Husqvarna Automower 310 – 2015–2021
- Husqvarna Automower 315 – 2015–2021
- Husqvarna Automower 315X – 2018–2020
- Gardena SILENO/SILENO+ (R100Li/R100LiC, R130Li/R130LiC/R160Li) – 2016–2021
- Gardena smart SILENO/SILENO+ – 2016–2017
| - 5852085-01
- 585208501
- 585 20 85-01
- AM-585208501
| - 5852085
- 58520850
- 585208502
- 58520850X
| G3/P15 (Husqvarna), G3/P15G (Gardena); replace seal strips after opening |
Important: different model years or platforms may use a different loom. Compare with your original part.
• Wiring loom for lift & collision sensors (Lift/Collision)
• Fits Automower 310/315/315X and selected Gardena SILENO/SILENO+
• MPN 5852085-01 / 585208501, GTIN 7393089276958
• Used, inspected and function-tested
• Replace seal strips after opening
