Original front sensor PCB (4-pin) for Husqvarna Automower, Gardena and Flymo robotic mowers of the G3-P1 platform (model years 2011–2015).
The PCB is located in the front section of the mower and processes the boundary wire signal, ensuring reliable operation within the defined cutting area.
This is a used, tested original part. Each board is tested for signal reception and function before shipping.
Part Numbers / References (compatible / replaced):
-
575640901 / 575640901A / 575640901B / 575640901C / 575640901D
-
575640902
-
575641001 / 575641001A / 575641001B / 575641001C / 575641001D / 575641001E
-
5926180 / 59261801 / 592618101 / 592618102 / 59261810X
-
593815901
-
7391736432719 / 7391833658383
-
AM575640901 / AM592618101
Suitable Models:
| Brand |
Model |
Generation |
Platform |
Model Years |
| Husqvarna |
Automower® 305 |
G3 |
P1 |
2011–2015 |
| Husqvarna |
Automower® 308 |
G3 |
P1 |
2013–2015 |
| Gardena® |
R38Li / R40Li / R45Li / R50Li |
G3 |
P1G |
2012–2015 |
| Gardena® |
R70Li / R75Li / R80Li |
G3 |
P1G |
2013–2015 |
| Flymo |
Flymo 1200R |
G3 |
P1C |
2013–2015 |
(Only for G3-P1 models with 4-pin front sensor – not compatible with later 6-pin versions from 2016 onwards!)
Technical Specifications:
-
Component: PCB front sensor board (loop sensor)
-
Connector: 4-pin
-
Platform: G3-P1 (2011–2015)
-
Function: boundary wire signal processing, front sensor system
-
Condition: used, tested, fully working
Scope of Delivery:
Highlights:
-
Genuine Husqvarna / Gardena / Flymo spare part
-
Compatible with many G3-P1 models
-
Tested original quality – no aftermarket replica
-
Sustainable and cost-effective alternative
