Husqvarna blade/cutting motor G3/P1 – 5744689-01
Replacement cutting motor (blade motor) for the mowing disc. Compatible with Husqvarna Automower 305/308/105 and several Gardena/Flymo models. Part no. 574468901, superseded by 5860619-01.
- Supersedes e.g. 574468901/574468902/580795601
- Specs: 18 V, 20 W, 3200 RPM
- Motor type: LINIX 45ZWN20-20
- Newer M4 mounting version (screws/washers included)
- GTIN/EAN: 7393089248535
Technical
- Voltage: 18 V
- Power: 20 W
- Speed: 3200 RPM
- Platform: G3 / P1
- Weight: 421 g
Installation
The motor is mounted under the cutting disc and drives it directly.
Note: Older units may use M3 mounting.
- Check model year/platform (G3/P1) before ordering
- If converting M3→M4: you may need to enlarge mounting holes to 4 mm
- Keep sealing surfaces clean and install with suitable washers
Compatibility
| Modell | Passende Artikelnummern/MPN | Ersetzt (belegt) | Hinweis/Version |
|---|
- Husqvarna Automower 305 – 2011–2015
- Husqvarna Automower 308 – 2013–2015
- Husqvarna Automower 105 – 2016–2023
- Gardena R38Li/R40Li/R45Li/R50Li – 2012–2019
- Gardena R70Li/R75Li/R80Li – 2013–2019
- Flymo 1200R – 2013–2018
- McCulloch Rob R600/R800/R1000 – 2017–2019
| 574468901 (5744689-01), 574468902 (5744689-02), 574468903 (5744689-03), 580795601 (5807956-01), 586061901 (5860619-01), 586061902 | 574 46 89-01, 574 46 89-02, 574 46 89-03, 580 79 56-01 | G3 / P1, Linix 45ZWN20-20, 18 V / 20 W / 3200 RPM, neuere Ausführung mit M4; ggf. Umrüstung von M3 auf M4 nötig |
Important: Please check whether your mower uses M3 or M4 mounting before you order.
• Cutting/blade motor for G3/P1 platform
• 18 V, 20 W, 3200 RPM; LINIX 45ZWN20-20
• Supersedes e.g. 574468901/574468902/580795601
• Newer M4 mounting; M3 conversion may be required
• Fits e.g. Automower 305/308/105 & Gardena R40Li
