Husqvarna cutting motor 585350301
This used and tested original cutting motor is the correct complete unit for Husqvarna Automower 320 and 330X. It is a practical solution when the cutter system motor has failed or the motor bracket is broken.
- Original part for Automower 320 and 330X
- Complete unit with bracket
- Suitable for G3 P2 model years 2013 to 2015
- Replaces 580234801
- Used and tested part
Technical
- MPN 585350301 and GPL 5853503-01
- Platform P2 and generation G3
- Plug-and-play unit with no software adjustment mentioned
- Typical fault symptoms are cutter system imbalance and broken cutting motor bracket
Installation
The mower must be opened for installation. Check the cutting deck area carefully before reassembly.
For a lasting seal, the sealing strips should be replaced during service. The metal flange on the shaft is not removable.
- Check and ideally replace the sealing strips
- Only suitable for Automower 320 and 330X in G3 P2
- Verify model year 2013 to 2015 before purchase
- This is a used and tested item
Compatibility
| Model | Suitable part numbers/MPN | Replaces | Note/Version |
|---|
- Husqvarna Automower 320 - 2013 to 2015
- Husqvarna Automower 330X - 2013 to 2015
| - 585350301
- 5853503-01
- 585 35 03-01
| - 580234801
- 5802348-01
- 580 23 48-01
- 580234802
| - G3 P2
- Complete unit with bracket
- Replace sealing strips
|
Important: Please verify model, generation and model year before installation. This article is used, tested and should be replaced as a complete unit.
• Used and tested original cutting motor supplied as a complete unit with bracket
• Suitable for Husqvarna Automower 320 and 330X in generation G3 P2
• Replaces part number 580234801 and installs as a plug-and-play unit
• Common fix for cutter system imbalance faults or broken cutting motor bracket
