Main page
»
spare parts
»
Husqvarna
»
Automower 310
»
Mowing motor & cutting system
»
Senkschraube Torx M4x8 für Messerscheibe/Messerteller
Senkschraube Torx M4x8 für Messerscheibe/Messerteller
NEW
Husqvarna countersunk Torx screw M4x8 for blade disc – MPN 535 13 05-01
Countersunk Torx screw (M4x8) used to fasten the cutting/blade disc to the mowing motor mount on many Automower models. Used and tested.
- Contents: 1 pcs countersunk screw
- For blade disc/cutting disc (M4x8)
- Part no. 535130501, superseded by 535130502
- Known compatible numbers: 724328751, 53513050X, AM535130501
Specs
- Thread: M4
- Length: 8 mm
- Drive: Torx (check size on old screw)
- Weight: 1 g
Installation
This screw connects the blade disc to the motor carrier. Depending on the model, several screws are used.
Please match model and production year/serial number before ordering.
- Inspect the disc for cracks/warping
- Clean the threaded seat
- For Automower 310/315: verify version (up to SN 1837xxxxx)
Compatibility
| Model | Matching part numbers/MPN | Replaced by (proven) | Note/version |
|---|---|---|---|
| 535 13 05-01, 5351305-01, 535130501, 535 13 05-02, 5351305-02, 535130502, 724328751, 5351305, 53513050, 535130503, 53513050X, AM535130501, AM535130502, 7391736277341, 7391883407776 | 535 13 05-02 / 535130502 | Countersunk Torx screw M4x8, quantity depends on model |
Important: These are used and tested parts. Compare thread, length and blade-disc version before installation.
• Countersunk Torx screw M4x8 for the blade/cutting disc
• MPN 535 13 05-01 (part no. 535130501)
• Superseded by 535130502 / 535 13 05-02
• Used & tested – match model and year/serial before ordering