Front loop sensor PCB (PCBA Loop Sensor Type 6) – 588903001
Used and tested PCB for the front loop sensors (2 sensors) on Husqvarna Automower G3 and compatible Gardena SILENO models.
- Genuine Husqvarna part no. 588903001 (also 5889030-01 / 588 90 30-01)
- Loop sensor Type 6, P2/P15, for 2 front sensors
- Common fault texts: “No loop signal” (depends on root cause)
- Used item, electrically tested
- Part history: superseded by 592852701 (5928527-01)
Technical
- Component: PRINTED CIRCUIT ASSY / PCBA Loop Sensor
- Generation: G3; Platform: P2/P15
- Weight: approx. 50 g
Installation
Check connectors, cable routing and seals before fitting.
After installation, run a boundary wire/loop signal test.
- Use only on G3 models with platform P2/P15
- Match part numbers (588903001 / 5889030-01)
- Ensure connectors are fully seated
- Make sure the housing is sealed after reassembly
Compatibility
| Modell | Passende Artikelnummern/MPN | Ersetzt (belegt) | Hinweis/Version |
|---|
- Husqvarna Automower 310 – 2015→
- Husqvarna Automower 315 – 2015→
- Husqvarna Automower 315X – 2018→
- Husqvarna Automower 320 – 2013→
- Husqvarna Automower 330X – 2013→
- Husqvarna Automower 420 – 2016→
- Husqvarna Automower 430X – 2016→
- Husqvarna Automower 440 – 2017→
- Husqvarna Automower 450X – 2016→
- Husqvarna Automower 520 – 2018→
- Husqvarna Automower 550 – 2018→
- Gardena SILENO R100Li/R100LiC, SILENO+ R130Li/R130LiC/R160Li/R160LiC – 2016→
| 588903001, 5889030-01, 5889030/01, 588 90 30-01, 588 90 30 01, 579660201, 592852701, 301088, 5892104 | superseded by 592852701 (5928527-01) | Loop sensor Type 6, front, 2 front sensors, G3 P2/P15 |
Important: Verify model, platform (P2/P15) and production year. For unclear issues, test boundary wire, PSU and wiring loom first.
• Genuine Husqvarna PCBA loop sensor Type 6 (front)
• For G3 platform P2/P15, 2 front sensors
• Fits selected Automower 310/315/320/420/440/520/550 and Gardena SILENO models
• Used item, electrically tested
