Display PCB (PCBA) for Automower 320/330X 5781271-01
Used and tested display PCB (HMI) for Husqvarna Automower 320 and 330X. A good fix if the display is blank or the keypad/display unit acts up.
- Genuine Husqvarna spare part (P/N 578127101 / 5781271-01)
- Fits Automower 320/330X (G3, platform P2, 2013–2015)
- Software programming required after installation (dealer/workshop)
- Logistics: 175×130×90 mm, about 110 g
Technik
- EAN/GTIN: 7393080488244
- Generation/Platform: G3 / P2
- Dimensions: 175×130×90 mm
- Weight: 110 g
Einbau
The board is located in the display/control panel. After replacement, a software update/programming is required.
If you are unsure, compare the part number on your old board before ordering.
- Disconnect power and use ESD-safe handling
- After installation: have the unit programmed / updated
- Check seals and tightness around the display area
Kompatibilität
| Modell | Passende Artikelnummern/MPN | Ersetzt (belegt) | Hinweis/Version |
|---|
- Husqvarna Automower 320 – 2013–2015
- Husqvarna Automower 330X – 2013–2015
| - 5781271-01
- 578127101
- 578 12 71-01
- 578 12 71 01
| 5781271, 57812710, 578127101, 578127101A, 578127101B, 578127101C, 578127101D, 578127101E, 578127101F, 578127101G, 578127101H, 578127101I, 578127101J, 578127101K, 578127101L, 578127101M, 578127101Rev., 578127101Rev.G, 578127102, 578127102Rev., 578127103, 57812710X, 5781272, 578127201, 578127201A, 578127201B, 578127201C, 578127201D, 578127201E, 578127201F, 578127201G, 578127201H, 578127201I, 578127201J, 578127201K, 578127201L, 578127201M, 5781771, 7393080488244, AM578127101, AM578127102, AM578127201 | G3/P2; programming/software update required |
Important: Please verify model year and platform (G3/P2). This is a used and tested part.
• Genuine Husqvarna display PCB (PCBA) – used & tested
• Fits Automower 320 and 330X (G3/P2, 2013–2015)
• Programming/software update required after installation
• Logistics: 175×130×90 mm, approx. 110 g
• Part numbers: 578127101 / 5781271-01
